JLT 2015-2020 Dodge Charger Hellcat / 2015-2018 Challenger Hellcat 6.2L Black Textured Cold Air Intake Kit w/Red Filter
- 12.30 LBS
- Calculated at Checkout
Need Some Advice? Speak to one of our gearheads
15-20 RWHP and No Tune Required!
2015-2020 Charger Hellcat
2015-2018 Challenger Hellcat (Will not fit with Redeye hood or 2019+ Challenger hood without modification)
JLT has jumped into the Hellcat intake market with both feet. We have owned a 2016 Hellcat Charger for nearly a year now and have been testing and designing this kit the entire time.
This kit includes a fully Roto Molded airbox that uses the factory fresh air (Ram Air) inlet from the grille/headlight that also seals to the hood. We feel this is the key component that puts our kit well above the rest. Not only does this box help keep inlet air temps down by blocking the filter from hot engine heat, it also helps hold in the cool air getting rammed in from the inlet creating a high-pressure area around the filter.
Speaking of the filter, our filter is a custom-built design made by S&B. It has a built-in bell mouth for super smooth and fast airflow as well as huge 1" deep pleats for more surface area than filters that look much bigger.
The intake tube is roto-molded plastic with a huge 125mm for superior airflow and NO heat soak like metal tubes.
With a mouth of 4.5" at the throttle body end, it is ready for any larger throttle bodies that may come in the future.
MAF and IAT adaptor plates
2015/16 Hellcats have a Mass Air Flow sensor and 2017-2020 have an Inlet Air Temp sensor. We designed our kit to work with BOTH. Included in each kit are CNC machined aluminum plates, gasket and stainless screws to adapt to either model year.
Includes new roto-molded plastic heat shield to block engine heat at idle and low speed.
Each kit comes with custom-designed and water-jet cut Lexan shields that bolt to the hood grille. Not only do they keep rain from the filter, they allow the cooler rammed air to stay in the box around the filter VS just being pushed out of the grille.
- Incorporates fresh air inlet from the grill.
- Uses a large area to make sure the filter has tons of cool air.
• JLT Plastic Intake Tube
• Silicone Reducer
• 5x7 S&B Air Filter Red Oil
• Roto molded Heat Shield
• JLT MAF adaptor plate
• JLT IAT adaptor plate
• JLT Charger Rain Shield
• JLT Challenger Rain Shield
• HD Clamps, all needed hardware
• 2019 Hellcat PCV Kit
GAINS AND TESTING
15-20 RWHP can be expected on a stock Hellcat
25-30+ can be expected on a pulley and tuned Hellcat
See all our testing videos below
No tuning required
We wanted to do as much testing as possible, so we sent kits to some of the best in the Hellcat business.
Lidio from Alternative Auto did some testing for us with his personal Hellcat and this is what he posted on his Facebook page:
"Before the season ended for us here in MI -- we got the car out in some good and much cooler Fall air, (mid 40*s) and tested out the JLT unit and also benefit from some much cooler air. The results have turned out great so far. We ran numerous 9.7’s at over 142mph and then our very best was a 9.68 @ over 143mph… which we backed up with a duplicate run. We believe the JLT was responsible for most of these gains in MPH and ET since our previous best of 9.77 at just over 140mph. The traction was great but could have been better, so I’m continuing to not “slam” the throttle off the starting line with only about a 1300rpm brake torque. 60-foots were in the low 1.4’s and could have been in the very high 1.3s with a little more traction and pushing the car harder on the hole-shot. These numbers were achieved with a full-weight car and no front runners. All shifts have been at or just over 7000rpm for the entire 2017 season!
With no trouble at all."
"The Hellcat JLT airbox kit showed impressive gains on both the Chassis Dyno and most importantly in the real world! We expected no less from the guys at JLT! Great fit & finish as usual from his products. The new JLT kit for hellcats is now included in our entry-level performance package for the 2015+ Hellcat models.
HOW TO RETURN AN ORDER
To return an order, please contact us HERE, with detailed information regarding the return and pictures showing the items current condition including the packaging. We can only accept items that are in new condition and have never been installed, with original packaging. We cannot accept any used, previously installed, or damaged items. If an item is sent back to us used, previously installed and/or damaged, it is now the property of DragRacingWheels.com and no refund will be issued. Pictures are required before an RMA will be issued. All returns must include the provided Return Merchandise Authorization (RMA) form or RGA number, to help expedite the return process. We will then provide the Return Shipping Address for the return. All returns are subject to a 20% Restocking Fee of the original purchase price. Some orders cannot be return – see the list of non-returnable orders below.
The buyer has 30 days from original purchase to initiate a return RMA and forward tracking information to us. No refund will be given for products that arrive after the 30 days from the original purchase date. Tracking information is required for all returns. When shipping an item back to us, we recommend that you use UPS, FedEx or any other carrier that offers signature confirmation and insurance, as we are not responsible for lost or damaged packages. Only the signature of an DragRacingWheels.com employee will suffice as proof of delivery. The customer agrees to bear all shipping and insurance charges, and all risk of loss during return shipment. If an order is refused “Returned to Sender”, no refund will be issued. Buyer is responsible for all return shipping charges.
We will not accept a return of an item that is damaged or defective if it has been used/installed, please inspect all orders as soon as you receive them and contact us HERE within 72 hours. If the order is damaged during shipment, DragRacingWheels.com will replace the item free of charge.
When you purchase items that qualify for a promotional offer such as Buy "X" number of items, Get "X" number of items free, the discount reflecting the price of the lowest-priced item is proportionally applied to each eligible item. If any item is returned, the refund will be equal to the original price of the item reduced by the proportional discounted amount.
Returns will not be allowed for the following items:
· DragRacingWheels.com gift cards.
· Final sale, closeout or discontinued products.
· Any products sold as "Open Box".
· Wheels that have already been mounted to tires. This includes tire and wheel packages from DragRacingWheels.com.
· All special orders, custom, and/or built to order wheels. This includes but not limited to, Billet Specialties, CCW, Forgestar, MRR, Race Star Industries and Weld Racing, Please contact us prior with any questions.
· All Race Star Industries Pro Forged Wheels. Confirm fitment with manufacturer before ordering.
· Non-defective used or installed items.
· Chips and Handheld Tuners
· All orders that required freight delivery.
· International orders that shipped outside of the United States.
RECEIVED DAMAGED ORDER
We try our best to prevent damage to all packages during transit by packing each order carefully. From time to time, though, damage will occur despite our precautions. If you receive an item that has been damaged in shipping, please call us within 72 hours of receipt and we will set up a claim for the product. Once this claim has been processed by the courier, we will reach out to you to return the product and send out a replacement. If the order is damaged during shipment, DragRacingWheels.com will replace the item free of charge.
We may request pictures to further assist with the completion of the claim.
The courier will reach out to you after the claim has been filed over the phone; please provide a reliable contact number when setting up your damage claim.
If you receive a defective product, please contact us within 72 hours, and we will process your return or replacement free of shipping charge. Do not install the defective item. Contact us HERE to process your return.
In the event of a defect that occurs outside our return policy, but within the manufacturer warranty, please contact the manufacturer directly to process your return. The manufacturer will have sole determination of the outcome of the claim. As a courtesy to our customers, DragRacingWheels.com will be happy to try to facilitate a thorough review of the claim, but we have no final say in the decision made by the manufacturer (i.e. approvals, denials, fees, etc.).
DragRacingWheels.com is not responsible for any labor costs which occur as the result of the installation of wrong or defective parts. This includes any appointment scheduled for dyno/tuning of the vehicle.
Once the return is received, please allow 5-7 business days for the refund to be issued. All items included in the return are fully inspected by our Returns Department prior to issuing a refund. All refunds will be issued to the original payment method. Allow 3-5 business days for the refund to settle back to the original payment method. The original shipping and handling charges are non-refundable. Processing time will vary, depending on your financial institution.
NEED TO CANCEL
We strongly suggest you call us at 1-833-287-6088 as soon as possible after placing your order if you need to change or cancel it, as orders are processed within minutes! If you email us, we may not receive them in time to stop the order from shipping out. Please double-check that your order details are correct before submitting your order during checkout. Products that are marked as Built to Order, Custom Order, and/or Special Order, cannot be canceled once processed.
An order that has already received tracking information and/or shipped cannot be canceled. If an order has been assigned a tracking number but the tracking information has not updated, this does not mean the order has not shipped. Please contact us HERE to set up a Return Merchandise Authorization (RMA) once your order has been received.