Beadlock Bolt Torque Specs

Forgestar Flow Formed F14 | D5 Wheels - Approx. 10-12 ft-lb

Weld Performance Ventura | Belmont | Laguna | Solana Wheels - Approx. 10-12 ft-lb

Weld Racing RTS Forged Wheels - Approx. 15-18 ft-lb

Weld Racing RM Forged Wheels - Approx. 15-18 ft-lb

Installation of the Bolt-On Beadlock Ring

Installation of the bolt-on beadlock ring uses a technique similar to that of installing a cylinder head.

1. Position the bolt-on ring over the tire bead.
2. Prepare each beadlock bolt with anti-seize before installing.
3. Start 4 bolts by hand in the 12, 3, 6, and 9 o'clock positions. It may be necessary to use 15" to 2.0" long bolts at first to start these 4 bolts and then replace them with the enclosed 1.25" long bolts after the rest of the bolts have been started.
4. Continue to start the remaining bolts by hand.
5. Begin tightening each bolt with a speed wrench in a crisscross pattern until they are fingertip tight.
6. Continue tightening with the speed wrench in a crisscross pattern until each bolt is hand tight.
7. Torque each bolt, in the crisscross pattern with small increments at a time.
8. Begin torqueing each bolt in a clockwise or counterclockwise pattern to proper torque specs.

SHOP Forgestar Beadlock Hardware and Accessories

https://dragracingwheels.com/lug-kits-beadlock-bolts/

SHOP Weld Beadlock Hardware and Accessories. 

https://dragracingwheels.com/beadlock-bolts/